Proiector fluorescent Dexel DFL-4/35:
Power Flo 4 lamps 35W DMX/Local Dimming control 230V.
Power Flo is the ideal solution for all lighting purposes where soft, diffuse light, high output, low heat of lamps and low energy consumption are required.
Typical applications are filling light and back light for cinematography and TV studios (News sets, Virtual studios, ChromaKey, ENG and EFP).
The special phosphor mixture of the new lamps makes the perfect match for the Quartz halogen and HMI light sources without color corrections.
The new lamps have a CRI of 95 and colors that respond to the special sensitivity curves of film and electronic imaging media.
Power Flo is a very lightweight fixture using DMX technology for dimming control of lamps as well as manual operation.
Power Flo units are available for using with professional fluorescent bulbs T12 0.60m (2ft) 20W, T12 1.20m (4ft) 40W, and professional Compact fluorescent lamps 55W.
Power Flo ballast and control panel:
The Power Flo models 2/55, 4/55, 2/35 and 4/35 are supplied with ballast or built into luminaire.
For the dimming models a control panel on the rear allow to control the lighting levels by a potentiometer or from the console by DMX-512.
On the Power Flo models 2/40 and 4/40 the lamps can be controlled remotely from a ballast box through the a control panel. The following controls are located there: potentiometer, switch on/off for each two lamps and DMX controls.
Several units of Power Bank can be wired in a network and remotely controlled from a digital console.
Black plastic fixture housing with integrated barndoors provides protection while shipping.
• Supplied with gel frame, silver focusing Louver and articulated mounting arm.
• High qualitiy reflector delivering maximum performance of lamps.
• Dimming: Power Flo are available in three versions:
- Digital (DMX) dimming version
- Local dimming version
- Non dimming version
4 x T12 0.60m (2ft) Professional fluorescent bulbs
• F20T12/Cinema 32/HO/CVG 35W 3200K
• F20T12/Cinema 55/HO/CVG 35W 5500K
• F20T12/Cinema 32/CVG 20W 3200K
• F20T12/Cinema 55/CVG 20W 5500K
• Dimensions (LxWxH): 380mm. (14.97&ldquo.) x 720mm. (28.37&ldquo.) x 380mm. (14.97&ldquo.)
• Weight: 7.0kg. (15.43Lbs.)
Digital Version: DMX technologies make it possible to integrate the Power Flo into a light setting system. Using DMX control multiple units of Power Flo can be wired in a network. With low voltage wiring all Power Flo fixtures can be controlled from a digital console.
Local Version: Power Flo with local dimming control are ideal when you are shooting on location. Can be operated by a potentiometer located on the back.
Non dimming Version: It is a low-cost version. Ideal for providing a permanent lighting in situations where a dimmer is not required.
• Equipment can be run off a standard household power line.
• Dimmable 100% to 5%
• Flicker Free
• 120V 230V 50/60Hz