Detalii
The new MAC 250 Wash is equipped with remarkably efficient reflector technology for greater output, extraordinarily fast and quiet movement, a variable frost filter for zoom effect and a CMY color mixing system with a complimenting color wheel. Sporting the award winning traits of the MAC family, the 250 Wash features user friendly modularity and the sleek exterior design of the new 250 range.
An extremely effective, multi-layered, dichroic reflector gives the MAC 250 Wash an exceptional output – surpassing its competitive peers using condenser based optical systems.
A CMY (cyan, magenta, yellow) color mixing system provides nearly unlimited color choices while a separate 6 slot plus open color wheel compliments with color correction and other filters. All color slots are replaceable and split colors are possible.
The MAC 250 Wash splashes out light onto a wide area (18°- 35°) with the greatest uniformity of coverage. A simple change of the front lens makes wide beam angles possible. The 59° diffuser lens gives a wide beam angle range of 59°- 67°.
Using the latest fan technology the MAC 250 Wash is an exceptionally quiet fixture. The head and base contain temperature sensors to ensure that fan speeds are kept to a minimum; bringing noise levels right down to suit theater and TV studio applications.
Zoom effect possibilities are provided by a variable frost filter.
The MAC 250 Wash has remarkable speed of movement, paralleled with the new 250 family to ensure a well choreographed show both on stage and truss.
An enhanced high resolution dimming system similar to the MAC 2000 provides remarkably smooth and even dimming, while a fast 20 Hz shutter for strobe effect is standard.
A multi position, tilt lock mechanism is featured to permit easy maintenance and handling.
Specificatii tehnice
Silent running fixture
High light output
Even color mixing
Complimenting color wheel
Variables frost filter
Interchangeable lenses
New generation software
Modular construction
Small and lightweight
Physical:
Base length: 375 mm (14.8 in.)
Base width: 315 mm (12.4 in.)
Yoke width: 393 mm (15.5 in.)
Height: 538 mm (21.2 in.)
Weight: 22.9 kg (50.4 lbs)
Source:
Lamp: 250 W discharge
Base: GY 9.5
Approved models:
Philips MSD 250/2: 3000 hr, 8500 K, 250 W
Osram HSD 250/78: 3000 hr, 7800 K, 250 W
GE CSD 250/2: 2000 hr, 9000 K, 250 W
Photometrics:
-MAC 250 Wash standard
Total output: 7700 lumens
One-tenth peak output: 6800 lumens
Half-peak output: 3100 lumens
Cutoff angle: 25.9°
One-tenth peak angle: 19.1°
Half-peak angle: 9.1°
Measurement conditions: 226 V, 50 Hz; no effects applied
Measurement source: Philips MSD 250/2
-MAC 250 Wash standard with frost
Total output: 4800 lumens
One-tenth peak output: 4100 lumens
Half-peak output: 1900 lumens
Cutoff angle: 48.8°
One-tenth peak angle: 34.8°
Half-peak angle: 16.0°
Measurement conditions: 226 V, 50 Hz; with frost applied
Measurement source: Philips MSD 250/2
-MAC 250 Wash wide-angle lens
Total output: 9100 lumens
One-tenth peak output: 8600 lumens
Half-peak output: 4900 lumens
Cutoff angle: 61.5°
One-tenth peak angle: 52.5°
Half-peak angle: 28.7°
Measurement conditions: 232 V, 50 Hz; no effects applied
Measurement source: Philips MSD 250/2
-MAC 250 Wash wide-angle lens with frost
Total output: 5100 lumens
One-tenth peak output: 4700 lumens
Half-peak output: 2600 lumens
Cutoff angle: 77.9°
One-tenth peak angle: 65.6°
Half-peak angle: 34.7°
Measurement conditions: 232 V, 50 Hz; with frost applied
Measurement source: Philips MSD 250/2
Control and Programming:
Data input: locking 3-pin and 5-pin XLR male sockets
Data output: locking 3-pin and 5-pin XLR female sockets
Data pinout: pin 1 shield, pin 2 cold (-), pin 3 hot (+)
Receiver: Opto-isolated RS-485
Protocol: USITT DMX-512 (1990)
DMX Channels: 13 (16-bit mode) or 19 (16-bit Extended mode)
Thermal
Maximum ambient temperature (Ta): 40° C (104° F)
Maximum surface temperature: 160° C (320° F)
AC Power
Operating range: 100 - 250 V, 50/60 Hz
AC input: 3-prong IEC male socket
Typical power and current
100 V, 50 Hz: 319 W, 3.8 A, PF 0.83
100 V, 60 Hz: 317 W, 3.4 A, PF 0.93
120 V, 50 Hz: 320 W, 2.9 A, PF 0.91
120 V, 60 Hz: 314 W, 2.7 A, PF 0.96
208 V, 50 Hz: 320 W, 1.9 A, PF 0.81
208 V, 60 Hz: 319 W, 1.7 A, PF 0.92
230 V, 50 Hz: 323 W, 1.6 A, PF 0.89
230 V, 60 Hz: 326 W, 1.5 A, PF 0.95
250 V, 50 Hz: 326 W, 1.5 A, PF 0.89
250 V, 60 Hz: 325 W, 1.4 A, PF 0.96
V = volts, Hz = hertz, W = watts, A = amps, PF = power factor
Allow for a deviation of +/- 10% from typical figures listed above.
Measurements made at nominal voltage. Local supply voltages can vary by +/- 10%.
Fuses
Main fuse: 6.3 A / 250 V, time-delay – P/N 05020020
Fuse F1: 6.3 A / 250 V, time-delay – P/N 05020020
Fuse F2: 2.0 A / 250 V, time-delay – P/N 05020009
ELECTROMECHANICAL EFFECTS
Cyan filter: 0 - 100%
Magenta filter: 0 - 100%
Yellow filter: 0 - 100%
Color wheel: 6 colors plus open and split positions
Dimmer: 0 - 100%
Shutter: Variable from 0 - 14 flashes per second
Zoom diffuser: 0° - 16°
Pan: 540° in 0.013° steps
Tilt: 257° in 0.007° steps
APPROVALS
EU EMC: EN 55 103-1, EN 55 015, EN 61 547
EU safety: EN 60598-2-17
US safety: ANSI/UL 1573
Canadian safety: CSA C22.2 NO 166
CONSTRUCTION
Housing: UV-resistant fiber-reinforced composite
Ingress protection factor: IP 20
INSTALLATION
Orientation: any
Minimum distance to combustible materials: 0.1 m (4 in.)
Minimum distance to illuminated surfaces: 0.5 m (20 in.)
Minimum center-to-center distance between MAC 250 Wash fixtures: 410 mm (16.2 in.)
INCLUDED ITEMS
Philips MSD 250/2 lamp (installed)
Safety wire
T-bracket, MAC 250/300 1/4-turn (2 pcs.)
XLR cable, 5 m (16.4 ft), black, 3-pin
Mains cable, 3 m (9.8 ft), IEC 3-pin
Wide-angle lens
User manual
